The DX88 provides 8 inputs and 8 outputs on Phoenix / Euroblock connectors for fixed installations and is an easy way to add local or remote expansion to AHM Audio Matrix Processors.
DX88 is a 96kHz DX expander enabling convenient placement of 8 mic/line inputs and 8 line outputs - via standard Phoenix / Euroblock connectors - wherever you need to get additional analogue audio in and out of a fixed install.
The DX88-P can be placed up to 100m away from the mixer for maximum flexibility of positioning. The expander connects via a single Cat5e cable to the mixer or upstream DX Expander via the DX A port. A second RJ45 port, DX B, is provided for daisy-chaining to a downstream DX Expander for additional remote I/O.
Features
- Compatible with AHM, SQ, Avantis and dLive systems
- 8 Phoenix/Euroblock Inputs with recallable 5-60dB gain, Phantom power and 20dB PAD
- 8 Phoenix/Euroblock Outputs
- Cascade mode
- Multiple DX88-P can be added to a system (up to 8 units on a single DX Hub)
- Optional rack mount kit
- Plug and Play - no IP addressing required
- Compatible with CAT5e (or higher) cables of up to 100m
Case für Allen&Heath SQ7 mit Doghouse, 4 Griffen und Schaumstoffpolsterung
9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 532mm, Height 254mm, Depth 729mm
Weight approx 17.2kg
Case für Allen&Heath SQ5 mit Doghouse, 4 Griffen und Schaumstoffpolsterung
9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 532mm, Height 254mm, Depth 729mm
Weight approx 17.2kg
Case für Allen&Heath SQ6 mit Doghouse, 4 Griffen und Schaumstoffpolsterung
9mm plywood with a black protective top layer
Incuding doghouse that opens from the top and back for easy access
Penn Elcom™ recessed black handles and butterfly-locks
Exterior sizes: Length 532mm, Height 254mm, Depth 729mm
Weight approx 17.2kg
Allen & Heath DT164-W
Wall-mount/floor Dante I/O expander 16 mic/line 4 XLR out
Der DT164-W bietet 16 Mikrofonvorverstärker und 4 Line-Ausgänge in einem vielseitigen Wandmontage-Design für eine dauerhafte Installation. Der reversible Montagerahmen ermöglicht die Wand- oder Wandmontage. Mit kundenspezifischen Halterungen kann das Gerät in einer Standard-NEMA-Box oder in einer Bodentasche für den Bühnengebrauch montiert werden. Der IEC-Netzeinlass kann durch ein Verschraubungsmodul und Schraubklemmen für die Festinstallation ersetzt werden, und ein DC 12V-Backup-Eingang ist ebenfalls vorhanden.
Der DT164-W bietet die gefeierten Allen & Heath-Vorverstärker mit 96-kHz-Wandlern für erstklassige Klangqualität über Dante sowie primären und sekundären Ports für Daisy-Chain oder Redundanz über sichere EtherCon-Anschlüsse.
Bis zu 16 Einheiten können zu einem AHM-64-, SQ-, Avantis- oder dLive-System hinzugefügt werden, wenn es mit einer SQ Dante- oder dLive 96kHz-Dante-Karte ausgestattet ist.
Die DT Preamp Control-Software ermöglicht die Fernsteuerung mehrerer DT-Expander und ermöglicht die Verwendung von DT-Expandern mit Dante-Ausrüstung 3Rd Party-Digitalmischpulte und Sound-Management-Systeme.
Features:
Dante Audio-Expander, 96kHz / 48kHz
Wandmontage oder Einbau von Tauchfallen
16 Mikrofonvorverstärker auf XLR mit Phantomspeisungs-Status-LEDs
4 XLR-Line-Outs
Primäre und sekundäre Dante-Ports mit verriegelbarem EtherCon
Redundanter oder Switched-Modus
Direkte Vorverstärkersteuerung von dLive, Avantis, AHM-64 und SQ
Fernsteuerung von Vorverstärkern über DT Preamp Control Software zur Integration mit 3rd-Party-Systemen
3 Stromversorgungsoptionen: 100-230V AC auf IEC- oder Schraubklemmenblöcken sowie 12V DC Strom
Gleichstrom kann als redundante Stromversorgung verwendet werden
Kann in eine Standard-NEMA-Box passen (benutzerdefinierte Halterungen erforderlich)
Kompatibel mit ACE Backstage 174SLBK Bühnentaschensystem
AES67 kompatibel
Dante Domain Manager bereit