Kostenloser Versand ab 500€**
sicherer Versand
gewerblicher B2B Shop Preise exkl. MwSt.
Bequemer Kauf auf Rechnung

Midas DN4816-O

Produktnummer: 1065054
Hersteller: Midas
Produktinformationen "Midas DN4816-O"

Bus-Powered StageCONNECT Interface with 16 Analog Outputs and Ultranet In/Out

  • Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
  • Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
  • StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
  • Two units can be cascaded for a total of 32 low-latency analogue outputs fed from a single StageConnect source
  • Flexible connectivity on stage and between side racks using any balanced microphone cable
  • Supports bi-directional audio configurations, with control data and 12 VDC / 18 W remote power
  • Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
  • Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
  • Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
  • External power supply for standalone use and offering remote power on the StageConnect Master output


DN4816-O
The DN4816-O is the perfect solution for connecting additional line outputs to your monitor or FOH console. It provides 16 analog outputs (e.g., to connect wireless transmitters for in-ear monitoring). Additionally, it provides an Ultranet input, that can be used to forward Signals from an AIR mixer via StageConnect.

The StageConnect interface can be connected to other StageConnect devices using a single XLR cable for multi-channel audio transmission. There are various I/O options available providing easily scalable connectivity in your side rack. The devices of the DN48XX Series can be daisy-chained and will negotiate the channels for their respective connectivity automatically.

  • StageConnect – The Future of XLR
  • What if any standard XLR or DMX cable could be used to transmit more than one channel of audio?
  • What if that cable could transmit signals not only one way, but bi-directionally?
  • What if that cable would allow the passage of control data or even MIDI at the same time?
  • What if a connected StageConnect device could receive up to 18 W of power through that same cable?

Well, these capabilities are exactly what StageConnect delivers – a new interface standard to be released by Music Tribe after two years of development. The Midas DN48XX Series is one of the first available I/O-Interfaces based on the StageConnect standard. This new standard comes with outstanding technical specs: 32 channels of uncompressed PCM audio in various I/O configurations, 24-bit at 48 kHz, below 0.5 ms of latency.

For optimum performance and long cable runs 110 Ohm DMX cable is required.

Ecosystem and Beyond
The DN48XX Series is the first generation of I/O Interfaces for the new StageConnect ecosystem. StageConnect was introduced with the Behringer WING mixing console. Even though the DN48XX Series was designed with the WING console in mind the devices can be used with all StageConnect devices like HUB4. The StageConnect Ecosystem opens a wide field of audio devices. May it be several I/O devices spread over the Stage or equipment in the siderack – the use cases for the DN48XX Series StageConnect Interfaces are virtually endless.


Cascade Interfaces to Meet Your Requirements
No matter if you want to use StageConnect for connecting wireless systems, external effects or playback systems, the devices of the DN48XX Series can easily be daisy-chained to meet the requirements of your respective I/O configurations. With a total bandwidth of 32 channels, all combinations ranging from 32 inputs over 16 In and outputs in parallel to 32 outputs can be achieved using different combinations of DN48XX interfaces connected using a simple XLR cable.

Power Via DC or StageConnect
The DN48XX Series devices can be powered via DC or via StageConnect. By design every SC Master provides 18W of power that can be used by devices in the chain. Depending on the respective power consumption multiple devices in the chain can be phantom powered by a single Master device. It should be noted that an SC device in the chain that is supplied with DC power can supply other devices connected to its Master port as well. To check your respective setup for power consumption, use the StageConnect Calculator (SSC Tool). This tool checks a virtually configured chain for the DMX cable lengths, power supply, audio routing and other parameters.

Automatic Bus Configuration
There are two ways to configure an SC chain. Either you can manually configure the chain using devices like WING or let the Automatic Bus Configuration do its work. This process adapts the input and output configuration of the SC Bus depending on the connected devices. Simply connect devices and the Master device of the chain will automatically change the routing. To check and plan setups the SSC Tool software is available, providing information about the routing and DMX cable length, power management and other parameters.

Analogue Outputs for IEM Transmitters
DN4816-O features 16 balanced line-level outputs that can carry up to 8 stereo mixes separated from the Console. All you need to do is mount the DN4816-O to your wireless rack and connect it to your console using a single XLR cable. This way you can save local outputs, reduce setup time and increase reliability considerably. Alternatively, these analogue outputs can also be used as spare outputs on stage receiving signals directly from the FOH consoles, e.g. for providing talkback or side fill outputs.

ULTRANET – Seamless Integration
The well-established ultranet technology transmits up to 16 independent channels of 24-bit digital audio via a single CAT5 cable between compatible digital devices. The DN48XX Series devices serve Ultranet connectivity for translation between StageConnect and Ultranet. This way more than 1 million Ultranet-Products in the market like the P16 monitoring system, AIR mixers and Turbosound speakers can be integrated in the StageConnect ecosystem.


StageConnect Calculator
The StageConnect Calculator (SCC Tool) is a tool that can be used for checking and planning setups. You can create a virtual SC chain to study the upstream and downstream routing. The calculator also indicates parameters maximum DMX cable lengths, power budget and the overall stability of your connection.

You can virtually change the configuration of individual devices, change their order and intuitively add or remove devices from the chain. This allows you to explore the possibilities of routing signals through the new ecosystem.

  • D/A conversion 24-Bit, 48/44.1 kHz, 114 dB
  • StageConnect bus capacity 32 ch, 24-Bit PCM audio
  • I/O latency ≤0.5 ms
  • Connectors Analog Outputs 16 x XLR male jacks, balanced
  • Impedance 100 Ω unbalanced / 200 Ω balanced
  • Max. output level +21 d B u
  • Ultranet 2 x RJ45
  • Shielded CAT5e cable max. length 75 m
  • StageConnect 1 XLR male, 1 XLR female
  • Shielded bal. 110-Ohm DMX cable max. 40 m
  • USB Type B
  • Frequency response 20 Hz - 20 kHz ±0.2 dB
  • Dynamic range 110 d B
  • Cross talk rejection @ 1 kHz, adjacent channels 110 d B
  • Noise (20 Hz - 20 kHz bandwidth) -90 dBu
  • Distortion 0.004% / 1 kHz / 0 dBu out
  • Power supply 12 VDC / 2.5 A (30 W) adapter included, remote power input via SLAVE XLR (female),remote power output via MASTER XLR (male) 12 VDC / 1.5 A (18 W)
  • Power consumption 9 W
  • Standard operating temperature range 5° - 45° C (41° - 113° F)
  • Dimensions 49 x 483 x 169 mm (1.9 x 19.0 x 6.7")
  • Weight 2.2 kg (4.9 lbs)
Herstellerinformationen ▼

0 von 0 Bewertungen

Geben Sie eine Bewertung ab!

Teilen Sie Ihre Erfahrungen mit dem Produkt mit anderen Kunden.


Vorgeschlagene Produkte

Line-Array L8-i - Seeburg Acoustic Line
Ultraschlanke und dezente Linienstrahler für anspruchsvolle Sprach- und Musikanwendungen in akustisch schwierigen Räumen wie Kirchen, Foyers und Hörsälen. Durch den Einsatz von Waveguides wurden das horizontale Abstrahlverhalten und die Kopplungseigenschaften der 3“ Breitbandchassis wesentlich verbessert. Die L-Serie umfasst insgesamt sechs Varianten, die sich in Länge und Curving unterscheiden. Durch die Ankopplung mehrerer Einheiten kann das System beliebig erweitert werden und an die geforderte Beschallungsaufgabe angepasst werden. Technische Daten:Speaker Components: 8 x 3“ widebandDescription: Straight / Curved / Curved       Powerhandling AES / Peak: 160 W / 480 WImpedance nominal: 16 Ω (4 Ω / 64 Ω optional)      SPL 1 W / Peak @ 1 m: 94 dB / 118 dB (*) Usable Range: 150 Hz - 16 kHz (- 6 dB)     Coverage horizontal / vertical: 80° x 7°Splay Angle: 0°Rigging / Fittings: 3 x M10 / 6 x M6  

713,45 €*
PA Lautsprecher X2 - Seeburg Acoustic Line
Multifunktionales und kompaktes 2-Wege System der Oberklasse. Der koaxiale Aufbau sorgt in Kombination mit einem aufwendig entwickelten und großflächigen Horn für ein absolut gleichmäßiges Übertragungsverhalten auch außerhalb der Hauptabstrahlachse. Hochleistungs-Neodymantriebe und Langhubschwingspulen sorgen für einen hohen Wirkungsgrad bei gleichzeitig stark reduzierten Verzerrungen. Für die Installation und den universellen Einsatz stehen drei M10 Gewindeeinsätze zur Aufnahme des Zubehörs zur Verfügung..Technische Daten:Bestückung: 6,5“ Nd (2“ VC) / 1“ Nd (1,7“ VC)Leistung: 250 W (AES) / 750 W (Peak)Impedanz: 8 ΩSchalldruck: 95db (1 W) / 124db (Peak @ 1 m)Frequenzbereich: 70 Hz - 19 kHz (-6 dB)X - Overpoint: 1,6 kHz (acoustical)Abstrahlwinkel: 90°x60° rotierbarAnschlüsse: 2 x Neutrik Speakon NL4MP in/outFlugpunkte: 3 x M10, 35mmMaße (BxTxH): 250x250x375 mmGewicht: 8,0kg

1.007,56 €*
Line-Array GL 8-c a - Seeburg Acoustic Line
Passive Erweiterungsmodule für GL-Systeme zur Erhöhung der Reichweite bzw. Vergrösserung des vertikalen Splaywinkels. Damit können GL 16- oder GL 24-Systeme einer speziellen akustischen Anforderung entsprechend angepasst werden. GL 8 wird 2-Wege aktiv betrieben. Versionen mit Passivweiche sind ebenfalls erhältlich. Technische Daten:Speaker Components: 2 x 6,5“ Nd / 8 x 1“ Nd Tweeter      Description: Cylindric Wave Radiator          Power AES / Peak: LF: 200 W / 600 W, HF: 75 W / 225 WImpedance nominal: LF: 16 Ω / HF: 16 Ω    SPL 1 W / Peak @ 1 m: LF: > 93 dB / 121 dB, HF: > 94 dB / 118 dB       Usable Range: 80 Hz - 20 kHz (- 6 dB)       Tuning Frequency excursion minimum: 90 Hz        X - Overpoint acoustical: Depends on presetCoverage horizontal / vertical: 100° x 31°         Mechanical Splay Angle: 24° Connectors: 2 x Speakon NL4MP in/out, Coding: 1 +/- HF, 2 +/- LF         Handles: 1 xRigging / Fittings: 6 x M10 

1.175,63 €*
Line-Array Galeo S - Seeburg Acoustic Line
Das Galeo S ist ein kompaktes High Performance Line Array für den universellen Einsatz. Viele innovative, akustische und mechanische Detaillösungen zeichnen das 2 x 6” / 1.4” System aus. Es benötigt zum Betrieb nur einen Verstärkerkanal. Besondere Eignung als unauffälliges Beschallungssystem für die hochwertige Festinstallation und den anspruchsvollen Tourbetrieb. Durch einfachen Austausch der AMR- Hornhälften kann zwischen einem 70° oder 100° horizontalem Abstrahlwinkel gewählt werden. Mit einem maximalen Splaywinkel von 16° kann bereits mit wenigen Elementen eine starke Krümmung der Zeile erreicht werden.Technische Daten:Typ: 2-Wege Line Array ElementBestückung: 2x 6,5" Neodym, 1x 1/4" NeodymtreiberLeistung AES/Peak: 400W / 1200WImpedanz: 16OhmSchalldruck HF: 95dBSchalldruck LF: 126dBFrequenzgang: 80Hz - 18kHzAbstrahlwinkel: 100° x 16°Maße (BxHxT): 450x190x385mmGewicht: 13,5kg

2.100,00 €*
Flange - Seeburg Acoustic Line
mit Kugelgelenk, mit zusätzlicher Feststellschraube, M10 x 15, max. Belastung 15 kg

66,39 €*
PA Verstärker S 5 - Seeburg Acoustic Line
Die vierkanaligen System-Endstufen der S-Serie vereinen modernste Leistungselektronik mit fortschrittlichem, bequem über Touch-Display bedienbarem DSP. Mit Ausgangsleistungen von 600 Watt bis 4800 Watt je nach Kanal decken sie eine große Bandbreite an Anwendungen ab, von Festinstallation bis Verleihbetrieb, von kleinen Konfigurationen bis zur Großbeschallung. Das intelligente Power Sharing sorgt für eine sehr gute Ausschöpfung der zur Verfügung stehenden Leistung beim Antrieb asymmetrischer Lasten.Technische Daten: Gesamtleistung: 5 kWAusgangsleistung IEC (W): 8 Ohm 4x 1200 / 1x 1200Ausgangsleistung IEC (W):  4Ohm 4x 1200 / 1x 2400Ausgangsleistung IEC (W):  2 Ohm 4x 1200 / 1x 1200Ausgangsleistung IEC (W):  100V 4x 1200 / 1x 2400Ausgangsleistung IEC (W):  70V 4x 1200 / 1x 1800Interface: 4.3" Touch Display und Push-EncoderEingang: 4x XLR analog / AES 3Ausgang: 4x SpeakONVerbindung: 1x USB-B, 2x RJ45Stromanschluss: PowerCONMaße (BxTxH): 483x330x88mmGewicht: 6,8 kg

3.444,54 €*
PA Subwoofer K Sub 1502 - Seeburg Acoustic Line
Subwoofer in Hochleistungs-Bassreflex Technologie. Die beiden Langhub 15“ Neodym-Chassis sorgen für eine impulstreue und wirkungsstarke Basswiedergabe über einen breiten Frequenzbereich. Die integrierte Class D Verstärkerelektronik leistet 2400 Watt und wird über einen DSP angesteuert, bei dem drei Filterpresets, ein zuschaltbarer Cardioidmodus und verschiedene Lautstärkeeinstellungen vorprogrammiert sind. Optional ist ein Frontdeckel mit Lenkrollen lieferbar. Der K Sub 1502 dp kann je nach Anwendung horizontal oder vertikal betrieben werden.Technische Daten:Lautsprecherkomponenten: 2 x 15 "NdBeschreibung: Passive Bass ErweiterungLeistung : AES / Peak 2000 W / 6000 WImpedanz: nominal 4 OhmSPL: 1 W / Spitze bei 1 m 104 dB / 142 dBNutzbarer Bereich: - 6 dB 37 Hz - 220 HzTuning: Frequenzgang: mindestens 45 HzAnschlüsse: 2 x Neutrik Speakon NL4MP in / outCodierung: 1 +/- Schleife durch, 2 +/- SubGriffe: 6 xRigging / Fittings: M20 oben und seitlichRadbordbeschläge Maße (HxBxT): 512 x 942 x 560 mm Gewicht 48,0 kg

2.100,00 €*
Speaker Stand - Seeburg Acoustic Line
Speaker Stand height 137,5 to 218,5 cm, max. load 50 kg

133,61 €*
PA Lautsprecher aktiv K24 dp 60° x 50° - Seeburg Acoustic Line
Das aktive Hochleistungstopteil K 24 dp eignet sich für alle Beschallungsaufgaben, bei denen ein schneller aufbau, sehr hohe Leistungsreserven und ein guter Sound wichtig sind. Die 2 x 12“/ 1.4“ Kombination wiegt inklusive der integrierten Flug-Hardware nur 37 kg, lässt sich untereinander zu grösseren Zeilenlängen hängen und ist äußerst kompakt. Der optionale Flugbügel lässt sich mittels Kugelsperrbolzen sehr einfach anbringen und auf den gewünschten Winkel einstellen. Die hochwertige, besonders rauscharme DSP Verstärkerelekronik fährt jeden Weg getrennt an und sorgt für einen Spitzenpegel von bis zu 140 dB.Technische Daten:Speaker Components: 2 x 12” Neodym - LF; 1,4” Neodym - HFDescription: High Power HiMid SystemPower: LF: 2400 Watt HF: 700 WattDSP: HDLM FPGA Processing 32 bit floating pointaD / Da: 24 bit / 96 kHzLatency: 0.8 msSPL max: 140 dB @ 1mFrequency range: 75 Hz - 19 kHzConnectors: Neutrik XLR in/out, Neutrik PowerCon in/outCoverage horizontal / vertical: 60° x 50°Handles: 2 x Rigging flying points: 1 x 35 mm Tophat, 5 x M10, 4 x 6 mm socket, Integrated flying hardwareMaße (HxBxT): 70,0 x 42,0 x 46,0 cmGewicht: 37,0 kg (incl. flying hardware)

3.780,67 €*
Quick Trigger Clamp - Seeburg Acoustic Line
Doughty Quick Trigger Clamp M10/12 slim line, black, WLL = 100 kg

41,18 €*
Monopod für L-Serie - Seeburg Acoustic Line
Größe und Design wie L 16j, unten mit M20 und oben mit M10 zu befestigen

217,65 €*
PA Lautsprecher K20 XOV 60° - Seeburg Acoustic Line
Das Hochleistungstopteil K 20 eignet sich aufgrund seiner Konstruktion für flexible Anwendungen in Vertikal- und Horizontalausrichtung. Die optimierte Anordnung und Ansteuerung der 2 x 10“/ 1.4 Komponenten sorgt für ein sehr präzises Abstrahl- und Phasenverhalten. Für die Installation kann das universelle Multi Rigg™ montiert werden. Das K 20 System ist als selfpowered Variante und als Version mit passiver Weiche lieferbar. Zur Anpassung an die Beschallungsaufgabe stehen zwei unterschiedliche Hornvarianten zur Verfügung.Technische Daten:Bestückung: 2x 10" Neodym Tieftöner und 1,4" Neodym HT-TreiberBelastbarkeit: 800 W AES, 2400 W PeakImpedanz: 4 Ohmmax. SPL: 134dBFrequenzbereich: 70 - 18.000 HzAbstrahlwinkel (H x V): 60° x 50° (Horn drehbar)2 Speaker Twist NL42 Tragegriffe35 mm StativflanschFlugpunkte: 10 x M10 Gewindenutzbar mit MultiRiggGehäusematerial: baltisches Birken-Multiplex mit Polyurea BeschichtungAbmessungen: (B x T x H): 300 x 360 x 660 mmGewicht: 22,5 kg

1.847,90 €*